ASTM B161 B163 Nickel 201 Alloy UNS N02201/2.4068 Seamless Nickel Alloy Steel Pipe

Used primarily for parts requiring excellent corrosion and strong magnetic properties such as:

• lead wires
• battery components
• transducers
• sparking electrodes
• heat exchangers
• implantable battery anode/connector tabs for CRM and Neurostimulation devices
• stamped or etched fabrications

• EN 10204/3.1B, EN 10204 3.1 and EN 10204 3.2 Material Test Certificates (MTC)
• Raw Materials Certificate
• 100% Radiography Test Report
• 100% PMI
• Heat Treatment Charts
• Third Party Inspection Report
• Surface roughness and size measurement
• Manufacturer Test Certificate( Impact Testing, Flatten, Spin,Curve, Hardness, Intergranular ,Point corrosions, Grain size, ET,UT, HT...)
• Laboratory Test Certificate from Govt. Approved Lab
• ......

• Ply Wooden Boxes
• PE Fabric Bundles
• Standard seaworthy export packing
• Plastic Bags, or as required

• Supplier / Manufacturer Name or Custom Logo - on request
• Specification
• Material Grade
• Nominal Size
• Schedule or Wall Thickness
• Method of Manufacturing (Seamless or Welded)
• Heat Number

Marked Pipe Sample: XTD ASTM B163 UNS N02201 SEAMLESS 42.2x 3.56*6000MM HEAT NO. 2023121205A15

Nickel 201 alloy is a commercially pure wrought alloy having properties similar to that of nickel 200 alloy, but with a lower carbon content to avoid embrittlement by inter-granular carbon at high temperatures.

It is resistant to acids and alkalis, and dry gases at room temperature.

Alloy 201 is a wrought commercially pure Nickel with a maximum carbon level of 0.02%. This alloy provides highly ductile mechanical properties across a wide temperature range.It provides corrosion resistance in neutral to moderately reducing environments. Nickel 201 is ferromagnetic. It provides high thermal and electrical conductivity in comparison to nickel-base alloys, stainless and low alloy steels. Because of its low carbon content (.02% max.) Nickel 201 may be considered for service above 600 °F (316 °C), where alloy 200 with higher carbon content is not recommended.